Shop Press

Shop Press is the news and idea hub for everything related to working on cars and trucks, focusing on repair, technology, and wrenching lifestyle.

From the creative minds at:

FEATURE STORY

Hot Off the Press

Interpreting Compression Tests–ASE Practice Questions (VIDEO)

Description Technician A has just completed a running compression test using a mechanical compression gauge. Technician B says that the test is used to check the volumetric efficiency of the engine. Technician A says that the higher-than-expected readings indicate a...

Do I Need a Tune-up?

If you’re like me, you might cringe a little. More often than not, they’re hoping this magical procedure will fix some mysterious issue with their car. But let’s break it down: what is a tune-up, anyway? Most dictionaries describe a tune-up as “a general adjustment to...

PSA: Be Safe With Brake Cleaner

If you work in a shop (and if you’re reading this, chances are you do), you are undoubtedly familiar with brake cleaner. And, if you know the scent of brake cleaner, you probably know that using it is not great for your health if it comes in contact with your skin,...

Compression Testing | ASE Practice Questions (VIDEO)

Description Technician A has just completed a dry compression test of a four-cylinder engine. All four cylinders are below specification by about the same amount. After performing a wet compression test, values remained unchanged. What could cause this condition? A)...

When a Voltmeter Isn’t Enough (Video)

Description With the variety of electronically controlled systems on a modern automobile, the days when a test light or simple voltmeter was enough to diagnose problems are long gone. Using a digital storage oscilloscope (DSO) can make troubleshooting faster and more...

P0420/P0430—The #1 DTC in the Country

DTCs (Diagnostic Trouble Codes) P0420 and P0430 are generic industry codes and part of the OBD-II standards. The descriptor labels the code(s) “Catalytic Converter Efficiency Below Threshold – Bank 1 (or 2)”. And the number one part sold to repair this problem is a...

Automotive technical schools just saw the largest graduation drop in a decade

by | Nov 17, 2022

The number of students who earned postsecondary degrees as auto technicians dropped by nearly 12 percent last year, the largest single-year decline since auto tech graduations began declining in 2012, according to a new report from the TechForce Foundation.

This is the fifth year the non-profit organization released its Technician Supply & Demand report, and there’s very little to be excited about if you’re a shop owner looking to hire more skilled techs. The most recent one-year drop caps a decade of declines in new auto tech degrees, totaling a 34 percent reduction from about 41,000 a year in 2012 to less than 29,000 in 2021.

Meanwhile, more than 22,000 new technician positions were expected to be created this year due to industry growth. Add to that nearly 60,000 positions that were left unfilled from previous years, and you start to get a sense why it’s hard to fill service tech jobs these days.

Nevertheless, total automotive techs employed actually increased in 2021 to 733,200, although that can also be seen as mixed news.

“What that means is that the new entrant technicians to the workforce have less training,” the report says. “This, at a time when there is strong agreement within the industry that we need better-trained new entrant technicians for the future facing the industry; a future that is arguably already here. With the increased adoption of EVs, autonomous vehicles and a myriad of other advanced technologies, hiring new entrant technicians with little or no training as the norm is a risky path to go down.”

One of the few slightly positive notes is the report debunks the widely held belief that transportation technicians – including auto, diesel, collision, aviation and avionics techs – are older than the workforce average and therefore retiring at a faster rate, further exacerbating these issues. Using federal employment data, they show that retirement rates in this industry are actually lower than the rest of the U.S. labor force. Seems professional wrenches aren’t graying as much as people think.

You can find much more information by signing up to download the full report on the TechForce website.

The articles and other content contained on this site may contain links to third party websites. By clicking them, you consent to Dorman’s Website Use Agreement.

Related Articles

Shop Press Comment Policy

Participation in this forum is subject to Dorman’s Website Terms & Conditions. Please read our Comment Policy before commenting.

Subscribe
Notify of
guest
2 Comments
Newest
Oldest Most Voted
Inline feedback
View all comments

Get Articles In Your Inbox

Subscribe to receive a monthly email summary of our latest Shop Press stories.

Shop Press

I agree to the above privacy statement and T&Cs

Thanks! You're now subscribed.