In The Bay Archives

Shop Press is the news and idea hub for everything related to working on cars and trucks, focusing on repair, technology, and wrenching lifestyle.

From the creative minds at:

FEATURE STORY

Hot Off the Press

Oil leak – ASE practice questions (VIDEO)

Description Which of the following is LEAST LIKELY to cause an oil leak?A) Torn valve cover gasket B) Worn wrist pin bushings C) Worn rear main seal D) Worn piston ringsMore ASE Practice Questions

Stainless doesn’t mean stain-proof; just ask Tesla Cybertruck owners

Two years ago, I posted a piece wondering if stainless steel cars were finally having their moment. I wrote about the introduction of the Tesla Cybertruck and the announcement of a new DeLorean, both of which were to be clad in stainless steel body panels. I also...

Low-mileage JDM automatics: Worthwhile or worthless? (VIDEO)

Description Nick and Lemmy check out a flex plate from an imported Japanese automatic transmission with very few miles under its belt. Even so, Nick explains why nobody really wants these transmissions or parts… and why many of them end up in the scrapyard.

Fuse box-compatible circuit breakers are the ultimate spares when space is limited

My brother and I both work in vehicle repair, and he sure got my attention when he gave me a set of resettable blade “fuses” to try out. These devices are actually fuse-shaped circuit breakers, and my new kit of six breakers goes up to 30A in 5A increments—just right...

Harmonic balancers – ASE practice questions (VIDEO)

Description Technician A says a defective harmonic balancer can affect the accuracy of ignition timing readings. Technician B says a defective harmonic balancer can damage the crank. Who is correct?More ASE Practice Questions

Easy tests for diesel exhaust fluid (DEF) contamination (VIDEO)

Description DEF is easy to contaminate, and fortunately, it's also easy to test. Check to be sure that your customers' DEF is up to spec with these simple tests.Related Videos

Technicians vs. DIYers: How well can you gauge tire pressure? (VIDEO)

Description After seating the bead on a new tire, the valve core needs to be installed and the tire inflated to the correct pressure. Some techs can air up a tire, install the core and land right on the target final pressure… but it’s not as easy as it looks. In this...

EVs go through tires quicker: here’s what that means for your shop.

Recently, my Shop Press colleague Andy wrote a piece about vehicle weights increasing and whether your lifts can handle it. Much of that increase in weight is due to hybrid and electric vehicles, which can be especially heavy with their batteries and motors. That...

Quick tip: how to use an old phone to check vehicle lights by yourself

by Lemmy | Nov 28, 2023

I picked up a habit many of you probably have: I had a “Lights Buddy” (patent pending) in the shop. This was usually someone who worked nearby who you could notify when pulling in a car. Said Lights Buddy would walk to the vehicle door as I exited the man door, open...

What is the best type of air filter? (VIDEO)

by Shop Press Staff | Nov 16, 2023

What is the best type of air filter? (VIDEO) Description Air filter elements come in a variety of shapes and designs, but which one is right for you? Nick and Greaser discuss the advantages and drawbacks of three air filter designs, including filtration effectiveness,...

Thread repair for mechanics: an incomplete guide to essential products and procedures

by Lemmy | Nov 9, 2023

One of the most talented mechanics I know observed me struggling with damaged threads and dispensed an opinion: “Stripped thread repair is one of the most basic skills everyone should know how to deal with.” That’s not revelatory. However, when I pronounced the part I...

Torches for courses: which heating tools should a mechanic own?

by Andy Greaser | Oct 31, 2023

The oxyacetylene torch is the cornerstone of any shop’s torch selection, and for good reason. Oxyacetylene is the industry standard for heating and cutting with a flame. With some practice and a little know-how, this time-honored tool can handle virtually any torch...

A few tips for ball joint removal

by Lemmy | Oct 24, 2023

I was thinking about some of the stumbling blocks I had when I began turning wrenches a long time ago, and I recall ball joints sticking out as problematic. I could not for the life of me understand why other mechanics considered them “gravy work.” And that’s because...

Five things to know when working on HID headlights

by Andy Greaser | Oct 17, 2023

While working on some high-intensity discharge (HID) headlights this week, I realized that soon many younger techs are likely to be inexperienced with these lighting systems—and it’s not their fault. In the transition years between halogen lighting and the LED era,...