Shop Press

Shop Press is the news and idea hub for everything related to working on cars and trucks, focusing on repair, technology, and wrenching lifestyle.

From the creative minds at:

FEATURE STORY

Hot Off the Press

Alignment and Inner Tie Rod Play – ASE Practice Question (VIDEO)

Description A vehicle equipped with a MacPherson strut suspension is in the shop for new tires and an alignment. The technician notes play in the left-side inner tie rod end. What should the technician tell the customer?A) The play will not affect the vehicle's...

Put the Second Floor to Work

Paying the mortgage (or the rent) on the bricks—the actual shop itself—is an expense. (A fixed cost, if you want to be particular.) But that building does more than keep your tools and techs dry. It provides room to work and house equipment. And if you’re like most...

How Does Regenerative Braking Affect Brake Wear?

We’ve come a long way since the days of rubbing wooden blocks against a wagon wheel to slow down a carriage. Modern braking systems are amazingly effective at halting several thousand pounds in a safe, controlled manner. The most common automotive braking technique is...

Don’t Overlook the Elementary

Today’s article is one borne from experiences. Exasperating experiences, no less. All novice mechaniclets are taught engines need fuel, air, spark, and compression to run. This is true, but we often take those for granted, and diagnosing even one vehicle with a basic...

ADAS Alignment and Calibration – ASE Practice Question (VIDEO)

Description Technician A says that the thrust angle must be maintained at zero degrees when performing an alignment on many vehicles equipped with certain ADAS systems (like lane departure warning). Technician B says that the steering angle sensor must be properly...

Writers, Print Vehicle Service Histories for Every Vehicle

The fellas who taught me to write service were arguably some of the best I’ve seen do the job. They had all sorts of tricks up their sleeves, like the boomerang business cards you’ve read about before. Today, I’d like to share another tip my friend Sam gave me. It...

Air Conditioning Service Fundamentals – ASE Practice Question (VIDEO)

by | Apr 7, 2026

Description

A/C system designs are changing, and new refrigerants are being introduced. Technician A and Technician B are discussing the importance of proper diagnosis and repair of today’s climate control systems.

Which of the following statements related to A/C service IS NOT correct?
A) As little as a 10% overcharge of refrigerant could lead to premature compressor failure, due to the higher heat loads caused by the increased head pressures.
B)
An undercharged system will have a hard time moving any excess oil from the evaporator core, leading to the internal coating of that heat exchanger and lower cooling capability.
C) Always follow the OEM oil balancing procedure when replacing a system component to avoid having added too much or too little to the system.
D) Compressor replacement should always be preceded by a thorough flushing of the system to remove contaminants and dirty oil.

Related Videos

The articles and other content contained on this site may contain links to third party websites. By clicking them, you consent to Dorman’s Website Use Agreement.

Shop Press Comment Policy

Participation in this forum is subject to Dorman’s Website Terms & Conditions. Please read our Comment Policy before commenting.

Subscribe
Notify of
guest
0 Comments
Newest
Oldest Most Voted
Inline feedback
View all comments