Shop Press

Shop Press is the news and idea hub for everything related to working on cars and trucks, focusing on repair, technology, and wrenching lifestyle.

From the creative minds at:

FEATURE STORY

Hot Off the Press

Why Wheel Fastener Torque Matters More Than You Think (VIDEO)

Description If you’re still using torque sticks and impact power to install lug nuts and lug bolts, it’s time to reconsider. Pete Meier explains why the torque wrench is the only correct tool for the job … and what can go wrong when you don’t use one.Related...

A History of the U.S. Presidential State Car (Part 1)

The U.S. presidential state car (aka "The Beast", "Cadillac One", "First Car", and codename "Stagecoach") is an unmistakable symbol of our nation’s executive branch. Since we had a presidential inauguration this year, I thought it would be a good time to look at the...

Dead Battery? (Video)

Description With dozens of electronic control units on automobiles built in the last 25 years, incidents of battery drain caused by an ECU that will not turn off when it is supposed to are on the rise. Tracing the ultimate cause can be made easier, though, if you know...

Check Engine Light On?

Diagnosing an illuminated check engine light (CEL) is something professional technicians do on an everyday basis. The key to a correct diagnosis is following a logical diagnostic process and gathering the information you need to isolate and repair the cause. The...

CDK Global Outage: The Aftermath.

Nobody wants to hear it, but cyberattacks and ransomware are part of a complicated new reality for the digital systems supporting the auto repair industry. Are you prepared? Months after the CDK Global outage ravaged the auto repair industry, there are still lingering...

DIYers: Yes, You Can Handle a Window Regulator Replacement

I’ve had an ongoing disagreement with a few of my Shop Press colleagues for some time now. Personally, I believe that replacing a window regulator is a perfect job for a DIYer. I mean, I’ve done them myself, and I barely even consider myself a DIYer. However, some of...

Betcha Haven’t Serviced the Tool You Use on Every Job

The most dangerous thing we do all day long is one most of us don’t think about: we raise a vehicle weighing a ton or three high in the air and work beneath it. And yet, lifts aren’t maintained well in most shops. I’ve seen lifts out of plumb, bent legs, lifts with...

How to get a little more (temporary) performance out of your air impact gun

by | Dec 21, 2023

I would like to start this article off by mentioning that yes, I know air impacts are slowly going out of style—which is exactly why you might want to keep this tip in the back of your head. Parts availability can be a challenge for some old impact wrenches, and even if they can be sourced, it’s often not worth the time it takes to renew the tool. So if you have a get-it gun that’s losing its mojo, there’s a half-baked method you can employ to coax some additional (albeit very temporary) life out of it.

Often impact guns lose efficacy when the rotor vanes wear. They’re really not unlike rotor tip seals in a rotary engine, or piston rings in a standard engine. Rust (from water that your inline filter didn’t catch) and debris in the air get into your gun and slowly wear away the vanes, which are often made of a phenolic polymer and seal against the metal housing. Or in your case, stop sealing.

The solution is a rebuild or a new tool. (Or jacking up the line pressure, but that might be part of what got you into this pickle in the first place.) But that doesn’t help much when you’re trying to nurse your ailing rattle-blaster through one more week of rotations until the nice man on the tool truck arrives at your shop.

So do the same thing we do for an ailing engine that’s getting a wet compression test: throw a shot of oil down the hatch. Skip the air-tool oil; that ain’t gonna help much. You want to shove some thick stuff into the air inlet. I work on a ton of Harley-Davidsons, so SAE 60 or 20W50 is always on the shelf, and that stuff usually bumps the power back up to acceptable levels to get by for a little longer.

The articles and other content contained on this site may contain links to third party websites. By clicking them, you consent to Dorman’s Website Use Agreement.

Related Articles

Shop Press Comment Policy

Participation in this forum is subject to Dorman’s Website Terms & Conditions. Please read our Comment Policy before commenting.

Subscribe
Notify of
guest
2 Comments
Newest
Oldest Most Voted
Inline feedback
View all comments

Get Articles In Your Inbox

Subscribe to receive a monthly email summary of our latest Shop Press stories.

Shop Press

I agree to the above privacy statement and T&Cs

Thanks! You're now subscribed.