Shop Press

Shop Press is the news and idea hub for everything related to working on cars and trucks, focusing on repair, technology, and wrenching lifestyle.

From the creative minds at:

FEATURE STORY

Hot Off the Press

Add or Delete These Simple Parts to Help Customers Save Money

Looking for an easy way to win over your customers that they’ll enjoy every time they drive? Look at their vehicles from a hypermiler’s perspective. In case you haven’t heard the term before, the hypermiling community is obsessed with optimizing their vehicles’ fuel...

Are You Properly Checking Hub Bearings For Wear? (VIDEO)

Description The old “grab the wheel and shake” test you may have used for tapered bearings doesn’t apply for the hub bearings found on most of today’s vehicles. Pete Meier explains how a dial indicator is necessary for a true wear check.Related Videos

Efficiency is the Name of the Game

Someone once told me that successful auto repair is a game of inches. But in our fast-paced, ever-evolving industry, inches are no longer accurate—we need to hit the bullseye every time. Margins are tighter, technology is advancing rapidly, and customer expectations...

Misfire Cause–ASE Practice Questions (VIDEO)

Description Technician A is diagnosing a misfire. He states that a misfire is caused by a fault in the ignition system and that new plugs and coils will repair the problem. Technician B says that a misfire is detected when the ECM detects a variation in crankshaft...

A History of the U.S. Presidential State Car (Part 2)

In Part 1 of this piece, I traced the history of the U.S. presidential state car from the beginning to the Kennedy Lincoln Continental. In this part, I’ll pick up with President Lyndon Baines Johnson’s state car and continue to the present day.1967 Lincoln Continental...

Why Wheel Fastener Torque Matters More Than You Think (VIDEO)

Description If you’re still using torque sticks and impact power to install lug nuts and lug bolts, it’s time to reconsider. Pete Meier explains why the torque wrench is the only correct tool for the job … and what can go wrong when you don’t use one.Related...

A History of the U.S. Presidential State Car (Part 1)

The U.S. presidential state car (aka "The Beast", "Cadillac One", "First Car", and codename "Stagecoach") is an unmistakable symbol of our nation’s executive branch. Since we had a presidential inauguration this year, I thought it would be a good time to look at the...

Dead Battery? (Video)

Description With dozens of electronic control units on automobiles built in the last 25 years, incidents of battery drain caused by an ECU that will not turn off when it is supposed to are on the rise. Tracing the ultimate cause can be made easier, though, if you know...

Does your shop handle performance work?

by | Oct 25, 2022

If you turn wrenches for a living, odds are good you’ve either hopped up your own ride at some point or had someone ask you to hotrod theirs. (Or maybe you’ve done it virtually.) The work is often fun and rewarding on a Saturday afternoon. But in the shop? There are a few things to think about to make performance work of any type profitable for you and satisfying for your customers.

Who is planning the work?

Aftermarket performance parts can cover a lot of use cases. It is totally possible to spend a bundle of money and buy a package of parts that makes a car worse to drive. It is just as possible to have a very modest budget and use thoughtfully chosen parts and get outsized returns. (Here’s a beautiful example of that in action.)

Engine in engine bay on hotrod

“Make it loud and shiny.” Photo by Mike Apice.

Performance goals need to be discussed. “A little more bottom end grunt” costs a lot less than “I want to break into the single-digit club.” Choosing the parts and discussing options takes time. Customers should, in my opinion, expect to pay for that consultation.

Now on the upside, some folks are happy to pay up and take your recommendations. (It’s also OK to not know what parts will yield desired results and say as much, and let the customer do their own researching, but I might say if you aren’t comfortable making recommendations, you might not be the best shop to perform the work.) There are plenty of packages from aftermarket companies for specified vehicles that will deliver an advertised level of performance, and those can work in your favor and free you from lengthy performance conversations.

How much does the work cost?

Installs on aftermarket equipment can differ from regular book times. Sometimes the work is straightforward and you can use the labor guide, but not always. In those scenarios, it might make sense to let your customers know you revert to straight time. Customers should be aware that fabrication and non-standard automotive work can require more time than more conventional work, and that time may not be easily quoted upfront as it is with a more pedestrian repair.

An engine sits in the bay of a muscle car.

If your customer has to ask how much it costs or what the warranty is, they probably aren’t going to love the answers. Photo by Mike Apice.

What is the warranty?

Performance parts often encourage an enthusiastic driver to hammer the car even harder, and as any hot-rodder can tell you, any rig is only as good as the weakest part. Most aftermarket performance goodies don’t have a warranty for good reason. Happily, most people looking for a little more giddy-up know and expect this. In my estimation, except for cases of gross installation errors, you probably don’t need to offer a warranty on parts or labor.

Is this too risky?

Performance work can put you and your shop in peril of running afoul of emissions or other laws. Pulling cats or defeating emissions controls isn’t the wink-wink, nudge-nudge affair it was years ago. Even if the vehicle owner is the one doing things like this, it wouldn’t surprise me in the future if shops become responsible for reporting missing equipment. Think of how it looks if you’re plumbing up a couple Flowmasters or Cherry Bombs on a vehicle where the owner clamped in straight pipe where the catalytic converter used to be.

Also, do you know what you don’t know? Are you familiar with the quality of the parts? Are you able to absorb the cost of accidental damage to a vehicle with a value that may be higher than the average commuter car? This isn’t meant to scare you off the work, but just cause you to assess the situation fully. Tread carefully!

An engine under the hood of a modern car

Modifying vehicles that are exempt from emissions laws (or predated them) is a vastly different kettle of fish from working on modern vehicles that are subject to restrictions. Photo by Mike Apice.

What’s the scope?

Installing bolt-in cat-back exhaust systems or wheel-and-tire packages is straightforward. It’s often great money on cars that are clean and easy to work on. Installs like this are a good way to make a customer happy. However, something a bit more nuanced, like porting a set of cylinder heads or tuning a fresh build can go sideways if things don’t go exactly right and you don’t hit your target of XYZ horsepower figure or if there are a lot of cooks in the kitchen.

Many customers can’t or won’t comprehend that playing general contractor and hiring many people to do many things is often a fool’s errand. And unfortunately, some shops fail to realize it, too. Make sure customers know what to expect and limit their expectations if you’re not the only wrench on the job.

Where is this car going to live?

Often, these projects move to the back of the line because of poor parts availability and better-paying “normal” jobs coming into the shop. Can you afford to tie up a bay (or worse, a lift and a bay)? Do you have extra room for parts and a car in some state of disassembly? Can you afford the time and space an “incompatible parts” situation can yield?

Three deuces sit atop a SBC.

Tuning three deuces might be right in the fat part of your shop’s bat, so to speak. Or perhaps this would be a nightmare. It makes sense to know if tuning is something you can take on before someone asks. Photo by Mike Apice.

Does the car need to be tuned?

With light bolt-on power-adders, “canned” tunes from popular speed part manufacturers are adequate. Similarly, older vehicles with gross adjustments of carburetor and ignition can be tuned pretty well with some road time. But after more serious modifications, or on modern performance platforms like an LS or a turbocharged fuel-injected lump, tuning the car to extract maximum power will likely be a necessity for your customer. Have a plan to farm that work out if an engine/wheel dyno isn’t a tool you own.

Conclusion

If your shop is a standard repair facility working primarily on daily drivers, really heavy performance work should probably be left to a shop specializing in it. That said, some lower-risk, lower-reward performance installations can be a good way to capitalize on customer preference and build a relationship with your shop’s patrons that moves service from “necessary expenditure” into “discretionary purchase.” Though there are some pitfalls, I’ve generally been pretty pleased with this type of work and the people who pay to have it performed, so long as they have reasonable expectations that we arrive at together.

Have you had success or failure with this type of work at your shop? Let us know about it in the comments section below!

The articles and other content contained on this site may contain links to third party websites. By clicking them, you consent to Dorman’s Website Use Agreement.

Related Articles

Shop Press Comment Policy

Participation in this forum is subject to Dorman’s Website Terms & Conditions. Please read our Comment Policy before commenting.

Subscribe
Notify of
guest
1 Comment
Newest
Oldest Most Voted
Inline feedback
View all comments

Get Articles In Your Inbox

Subscribe to receive a monthly email summary of our latest Shop Press stories.

Shop Press

I agree to the above privacy statement and T&Cs

Thanks! You're now subscribed.