Shop Press

Shop Press is the news and idea hub for everything related to working on cars and trucks, focusing on repair, technology, and wrenching lifestyle.

From the creative minds at:

FEATURE STORY

Time-Saving Tip for Bleeding Stubborn Brakes (VIDEO)

Time-Saving Tip for Bleeding Stubborn Brakes (VIDEO)

Some brake jobs can turn into headaches when small air bubbles get trapped within the caliper itself. To resolve the problem, you could pump the brakes over and over, or you could try this handy suggestion to free the air bubble and move on with the brake bleed process.

read more

Hot Off the Press

Shop Profile: Hansville Repair

It’s a small village, but Hansville, Washington makes a grand first impression. As Hansville Road crests a hill and descends into town, a breathtaking panorama unfolds—Puget Sound, Whidbey Island, and distant Mount Baker stretched across the windshield like a...

Mastering the Numbers

Running an auto repair shop is about more than just fixing cars. While providing top-notch service is essential, managing a truly successful business also depends on understanding and acting on the financial barometers of the operation. One of the most important of...

Don’t Overlook This Step When Servicing Brakes (VIDEO)

Description A brake service job isn’t complete unless the reservoir cap’s diaphragm has been pushed back into place. This simple step is easy to forget, but it helps to reduce brake fluid contamination and ensure proper system function.Related Videos

Watch This Video On Dry Sump Oil Systems

Recently, I was talking with Shop Press head honcho (Chief Bottle Washer—Ed.) Lemmy about something I wasn’t familiar with: dry sump oil systems. If you’re a newer tech who hasn’t worked on any high-end sports cars, you also might not be familiar with these systems....

Tariff Talk: A Look Backwards at The Chicken Tax

Well, the mood’s been a little heavy with all the talk about tariffs as of late. There’s an automotive tax that’s been around for a long time that is a perfect thing to mention if a conversation is getting uncomfortable. And if you’re a car nut, you should at least...

Watch This Video on the Inventor Who Put Lead in Gasoline

Recently, I went down an internet rabbit hole about why gasoline once had lead in it and how it got removed. In my searches, I found this video on inventor Thomas Midgley Jr., who not only invented leaded gasoline to combat engine knocking but also synthesized...

How to fix a Ford cupholder for almost free

by | Dec 15, 2021

The in-dash cup holder on certain late ’90s to early 2000s F-150s, Expeditions and Navigators – which also holds an ash tray in some vehicles – has a tendency to break in service, leading to a cupholder that has to be pried into the open position in order to use it.

F-150 interior

Ordinarily, when you press the cupholder (bottom right of the center stack), the cupholder either latches or unlatches, and a spring pushes it into the deployed position—until the spring falls off. Photo by Lemmy.

These are a spring-loaded affair that opens and closes with a latching-type switch: push to open, then push to close as well. These are not very hard to repair for a customer. It’s fast enough it’s a little value-add job you can perform basically for free.

Removing f-150 cupholder

Here’s where you release the retainers. If you get level with them and use a flashlight, it becomes evident where you need to press ’em down. Photo by Lemmy.

  1. First, you need to get the cup holder out. Open the cup holder. There are two little fingers that need to be depressed at the same time to remove the assembly. (You can do one at a time if you wiggle it a bit and are gentle.)
  2. Sneak it out, then disconnect the little pilot light harness (if equipped) Pull the cupholder free of the vehicle.
    Cupholder spring

    Here’s what that spring looks like. It’s probably floating around in the center stack. Photo by Lemmy.

  3. Most likely, you won’t find the spring on the back of the cup holder. It’s heat-staked to the rear of the cup holder, and the heat stakes usually give out; that’s why it stops popping open. Fish around in the dash until you find it. Pull it out, then using a burr tool, smooth out the area with the heat stakes.
  4. Using the spring as a template, drill two small pilot holes, and then use a thread-forming screw in each hole, and your repair is complete!
    Spring reattached

    After removing the remnants of the heat stakes, a couple of self-tappin’ screws got this cupholder ready for another twenty years of service. Photo by Lemmy.

  5. Pop the light back in and slide it back into place.

It’s a little thing, but restoring the function of something that affects driver happiness like the cup holder usually pays off in spades in terms of customer loyalty, and you won’t spend much time or money to perform this repair.

The articles and other content contained on this site may contain links to third party websites. By clicking them, you consent to Dorman’s Website Use Agreement.

Related Articles

Shop Press Comment Policy

Participation in this forum is subject to Dorman’s Website Terms & Conditions. Please read our Comment Policy before commenting.

Subscribe
Notify of
guest
2 Comments
Newest
Oldest Most Voted
Inline feedback
View all comments

Get Articles In Your Inbox

Subscribe to receive a monthly email summary of our latest Shop Press stories.

Shop Press

I agree to the above privacy statement and T&Cs

Thanks! You're now subscribed.