Shop Press

Shop Press is the news and idea hub for everything related to working on cars and trucks, focusing on repair, technology, and wrenching lifestyle.

From the creative minds at:

FEATURE STORY

Hot Off the Press

Testing Battery State of Charge – ASE Practice Question (VIDEO)

Description Technician A and Technician B are discussing battery testing. Technician A says that an open circuit voltage of less than 10.5 volts indicates a bad battery. Technician B says that a reading of 12.5 volts indicates an 80% state of charge. Who is correct?A)...

PSA: Be Safe With Carburetor Cleaner, Too

Recently, I wrote about how brake cleaner can be hazardous if not used correctly, and how you should take safety precautions when using it. One of our readers had an insightful comment on the piece.Now, I think it’s debatable that carburetor cleaner is more hazardous...

The Real Meanings Behind OBD-II Diagnostic Trouble Codes (VIDEO)

Description When the check engine light (CEL) pops up and your OBD-II scan tool displays a code, that’s only the start of the diagnostic process. By breaking down the structures used to create DTCs, you can learn how to “decode” beyond the simple descriptions...

What’s Torque-to-Angle All About?

Torque-to-angle, also known as angle-torque or torque-plus-angle, is a fastening method that combines an initial torque application with a subsequent angular rotation to achieve precise bolt or fastener tension. This technique ensures consistent clamping force,...

Hybrid A/C Compressor Oil-ASE Practice Question (VIDEO)

Description Technician A is working on a hybrid vehicle’s air conditioning system that utilizes a high voltage electrical compressor. Technician B says that only the oil specified by the vehicle manufacturer should be used in the compressor. Technician A says PAG oil...

Troubleshooting a “No A/C Compressor Engagement” Fault

As the weather warms, more and more of your customers will be switching over their HVAC control settings to “max A/C”. If the system doesn’t respond by blowing that refreshing cool air into their faces, they will show up at your door to find out why. When faced with...

Diesel Engines and Racing

Nearly every conceivable version of the internal combustion engine has made its way to the Indy 500. But it was a 1931 entry of a rather unusual type that made it into the record books as the first to complete the entire 500-mile race without a pit stop. That entry...

Geography by way of fittings and couplers

by | Nov 29, 2022

As a little mechaniclet, I didn’t really give much thought to my air tool fittings or their air lines. Yes, the type of tool, the amount of air moving through the lines, and the distance from the compressor are all variables that determine how well a tool might work, but I was just too dumb to know those things. One thing I did know, though, was when I blew up a fitting I needed to ask for “L” style replacements.

As it turns out, that “L” is a grouping Milton industries gave to the style of fitting competitor Lincoln used. Those “L” fittings were common to every shop in which I ever turned a wrench, and that was smack-dab in the middle of flyover country in the Midwest. In time, I learned that style was common to that area, since all of my mechanical friends used that same style at their shops. And here is where I am going to ask for your help: I’d like to know where you are and what your shop uses. Here’s why.

Air line fittings

There iss quite a bit of variation in fittings used across the United States. Image by Josh Seasholtz.

The first time I tried to hook up tools here on the East Coast, I realized my fittings and couplers were all wrong. In the Keystone State, most places use what Milton calls an “M” fitting, which are also called “industrial.” I actually like these much better, because the “L” fittings have a long, narrow tail that breaks when mishandled. Once I switched to the “M” style, I stopped going through so many fittings on my tools.

Male air fitting on a hose.Industrial-style fittings are common in many shops. What do you use? Image by Josh Seasholtz.I learned later that “D” and “G” styles are popular on the West Coast. In researching this article, I also found “Nitto Kohki” fittings are ubiquitous in Japan, Australia, and New Zealand. Luke, a Dorman technician in our Proving Grounds with a bit of heavy truck experience, tells me Tru-Flate-style (“T”) fittings are common in truck shops. According to Tru-Flate, this style has a wide surface that leads to better sealing and longer seal life, and also has lower pressure drops and greater air flow, which would make sense in a truck setting where torque specs are higher.

To put another fly in the ointment, it seems as though many garage nuts feel the Milton “V” style checks a lot of automotive boxes in terms of flow, so those appear to be cropping up in many places without a unifying regional background.

Air compressor with line

Some shops run different fittings on different lines to prevent accidental hookups, like running a paint gun on a line with a tool oiler. Image by Josh Seasholtz.

And now, back to my original request: I’d like to know where you are and what you use, because our Creative Design Manager has agreed to make a map based on that input. I think it might be handy to know what fittings are in use in what parts of the country, and my hope is with enough feedback, we can make a fairly accurate map that’s helpful for any of us traveling to do some work.

Air coupler chart

You can use the handy chart to determine what style you use if you’re not sure/. (It’s also a big help for figuring out what you need to adapt to.) It really only works on the fitting side; the couplers all look similar. Milton Industries image.

So thank you in advance! Just let us know where you are and what you use (and any other places you might know about from your travels) and we’ll record the data points and drop the map in here when we have enough collected.

The articles and other content contained on this site may contain links to third party websites. By clicking them, you consent to Dorman’s Website Use Agreement.

Related Articles

Shop Press Comment Policy

Participation in this forum is subject to Dorman’s Website Terms & Conditions. Please read our Comment Policy before commenting.

Subscribe
Notify of
guest
21 Comments
Newest
Oldest Most Voted
Inline feedback
View all comments