U

Shop Press

Shop Press is the news and idea hub for everything related to working on cars and trucks, focusing on repair, technology, and wrenching lifestyle.

From the creative minds at:

FEATURE STORY

Hot Off the Press

Writers, Print Vehicle Service Histories for Every Vehicle

The fellas who taught me to write service were arguably some of the best I’ve seen do the job. They had all sorts of tricks up their sleeves, like the boomerang business cards you’ve read about before. Today, I’d like to share another tip my friend Sam gave me. It...

The JDM Class of 2001 Comes of Age

Japanese Domestic Market (JDM) cars during their heyday in the 1990s were the unattainable treasure, not for North American consumption, only accessible in video games. They were tantalizingly close but not truly attainable. Turns out all it takes is patience: 25...

Ferdinand Porsche: Engineering the Shape of Speed

Ferdinand Porsche is one of the earliest designers featured in our “Automotive Paragons” series, and few figures loom as large over the modern automotive world. His career began at the dawn of motoring itself, when horseless carriages were still experimental...

Service Writers: Don’t Leave Your Greatest Diag Tool in the Shop

Today’s piece starts with a one-question quiz that’s not a trick question: in your shop, what is your best diagnostic tool? It’s not a meter or a scan tool or a stethoscope, though those all are handy items to have nearby. It’s your technician. And as much as leaving...

Why Your Shop Should Be Using Loaded Knuckles to Save Time and Money

It’s midday on a Friday, and an older-model Subaru rolls into the bay in need of new wheel bearings. In the past, this would have meant a few hours with the shop press, possibly a torch, and maybe some choice words to get the job done. But it doesn’t have to be that...

Use the Little Radiator—and Have Customers Do the Same

Disclaimer: If a car is overheating and it is possible to safely exit the road and stop the car, that should always be the first course of action to avoid the risk of fire. The solution described in this article should only be used where that is not possible. If a car...

ADAS Alignment and Calibration – ASE Practice Question (VIDEO)

by | Mar 31, 2026

0 comments

Description

Technician A says that the thrust angle must be maintained at zero degrees when performing an alignment on many vehicles equipped with certain ADAS systems (like lane departure warning). Technician B says that the steering angle sensor must be properly calibrated and the front wheels pointed straight ahead before calibrating forward facing cameras or radars.

Who is correct?
A) Technician A
B) Technician B
C) Both A and B
D) Neither A nor B

Related Videos

The articles and other content contained on this site may contain links to third party websites. By clicking them, you consent to Dorman’s Website Use Agreement.

Shop Press Comment Policy

Participation in this forum is subject to Dorman’s Website Terms & Conditions. Please read our Comment Policy before commenting.

Subscribe
Notify of
guest
0 Comments
Newest
Oldest Most Voted
Inline feedback
View all comments